The Industrial Flooring Experts
       
 

    

A & B Flooring SYSTEM 1000
Epoxy Coating

Description:  A & B System 1000 is a 100% Solids, two component epoxy. This system may be used as a thin coat (using a thinning agent), 2 mil coating, up to and including a 62 mil self leveling, flood coat. This coating is excellent in the resistance of abrasion, impact and most chemicals.

Application:  A & B System 1000 is a very effective coating in meeting the demands associated with heavy industry and applications requiring VOC compliance. For an even greater finish.  
Performance Properties:
  • Coverage is 350 sq. ft. per gallon at 4 mils.
  • Recoat within 24 hours at room temperature.
  • Pot life 30 min. at 75º
  • Cure time at 75º
    - Moderate Traffic - 24 hours
    - Heavy traffic - full cure - 48 hours
  • 100% Solids
  • Tensile strength of 5,974 PSI
  • Compressive strength of 11,930 PSI
  • May be thinned and used as a primer
  • ASTM 0-968 falling sand test: (amount of sand to remove one mil of coating)
    - A&B System 5000 39 liters
    - A&B System 4000 16 liters
    - A&B System 1000 16 liters
    - Acrylic urethane 13 liters
    - Acrylic Seal 4 liters

Chemical Resistance:

Xylene ----------------------------------------------------------------------------- Excellent
Methyl Ethyl Ketone ----------------------------------------------------- Spills Ok - Immersion Poor
10% Acetic Acid ---------------------------------------------------------- Excellent
50% Acetic Acid ---------------------------------------------------------- Spills Ok - Immersion Poor
10% Nitric Acid ------------------------------------------------------------ Excellent
10% Hydrocloric Acid ------------------------------------------------- Excellent
37% Hydrocloric Acid ------------------------------------------------- Good
50% Sulfuric Acid -------------------------------------------------------- Excellent
50% Lactic Acid ----------------------------------------------------------- Fair
50% Sodium Hydroxide --------------------------------------------- Excellent
100% Gasoline ------------------------------------------------------------ Excellent
100% A-1 Jet Fuel ------------------------------------------------------- Excellent
100% Brake Fluid Auto ---------------------------------------------- Spills Ok - Immersion Fair
100% Skydrol 500A --------------------------------------------------- Spills Ok - Immersion Fair
100% Turpentine --------------------------------------------------------- Excellent
100% Motor Oil ----------------------------------------------------------- Excellent

Color: Clear, and any standard A & B Flooring color

Advantages:  Attractive, seals concrete, prevents dusting, prevents oil penetration and staining, very high abrasion resistance, increases cleanability while prolonging life of concrete. In most cases this coating is harder than the concrete itself.

 

    
 
     
 
                                                        A & B Flooring, Inc. 10095 W. SR 120, Orland, IN 46776, phone:260.829.6711, e-mail:service@aandbflooring.com