A & B SYSTEM 5000 URETHANE

Description:

A & B System 5000 Urethane

( Click image to enlarge )

A & B Flooring, Inc. systems 5000 is a light amber, moisture cure, single component polymer. This system has been formulated for outstanding wear and abrasion qualities. It maintains a glossy finish while increasing light reflectivity. This system is installed in layered coats of approximately 2-3 mils (dry film thickness) per coat. A & B Flooring recommends a three coat system for best results. This coating has a 50-60% solids content.

Application:

A & B System 5000 is a very effective coating in meeting the demands associated with industrial flooring applications. Examples: stamping plants, automotive plants, warehouses and most manufacturing facilities.

Performance Properties:

• All curing times are based on laboratory conditions.
• Temperature, humidity, etc. will vary curing times.
• Coverage 300-325 sq. ft. per gallon, roller or brush, 4-5 mils wet.
• Recoat 4-6 hours at room temperature
• Cure time: Light traffic 8 hours - Full cure 18-24 hours
• Taber Abrasion: 12

• Direct impact 160 in-16
• ASTM 0-968 falling sand test: (amount of sand to remove one mil of coating))
  • A & B System 5000 39 liters
  • A & B System 4000 16 liters
  • A & B System 1000 16 liters
  • Acrylic urethane 13 liters
  • Acrylic Seal 4 liters

Chemical Resistance:

Color:

Clear (colors will be darker in this product)

Advantages:

Attractive, seals concrete, prevents dusting, prevents oil penetration and staining, very high abrasion and impact resistance. Increases clean ability while prolonging life of concrete. A & B System 4000 is a thin film coating for maintaining a clean environment. A & B System 5000 is the finest thin film coating available for wear and abrasion resistance, while maintaining a high gloss.

Back to Top